Routing Switchers

High Performance Full Matrix Routing Switcher

16 Video Inputs to 16 Video Outputs
Breakaway Stereo Audio
Battery Backup
Flat to Over 100 MHZ
Store/Recall up to 16 Patterns
Manual and RS232 Control
Vertical Interval Switching
SAS (Simple ASCII Strings) RS-232 Instruction Set
Composite, Y/C (4-pin din), and Component versions available

The RS16x16HB is a high performance audio/video routing switcher in a thin profile 6-unit rackmount chassis. It accepts and routes almost any 1 volt Composite, Y/C, or Component video input including off-the-air and non-timebase corrected signals.
The RS16x16HB accepts and routes mono or stereo unbalanced audio up to 2 volts p-p or balanced stereo audio from 0 to +18 dbm. Video and audio inputs can be routed independently; they need not have the same destinations.

Easy manual operation by front panel key pad, or send routing commands from a terminal or computer to RS232 interface.

Technical Specifications
UnbalancedAudio
	Frequency Response	20 Hz to 30 KHz
	Input Level	up to 2 volts p-p
	Input Impedance	100K
	Output Impedance	1K
	Crosstalk	less than - 85 db at 1 KHz
	Audio Connectors	(64) RCA
BalancedAudio
	Hum & Noise	less than -90 db
	Frequency Response	20 Hz to 50 KHz +/- 1/4 db
	Level	0, 4, or 16dB, clipping at 18dB
	Impedance	Bridging, or 600 ohms termination
	Crosstalk	less than - 9B @ 20 KHz
	Connectors	Phoenix screwtype, removable
Video
	Frequency Response	DC to 200 MHz, @ 300mv, < -3dB @150 MHz Typ - 6dB @ 200 MHz @ 1.0v, less than -3dB @ 115 MHz
	Input Impedance	75 ohm
	Output Impedance	75 ohm
	Crosstalk	all hostile: - Typ < -7B @ 5 MHz - Typ < -55dB @ 20 MHz - Typ < -25dB @ 100 MHz one hostile: < -4B @ 200 MHz
	Video Connectors	BNC (S-Video ships with 4-pin Din)
PowerConsumption
		nominal 15vdc, 1.5A (from plug-in module supplied)
PowerConnector
		5mm/2mm coaxial
Dimensions
		19" x 10.5" x 2" deep
ShippingWeight
		9 pounds