      


    

    
The MEDIAFLEX8 presentation switcher accepts up to eight composite, Y/C, component or analog HDTV video sources, eight unbalanced or balanced stereo audio sources, and connects any one of the input sources to one or more of the eight zones with volume and tone control (VT). An independent 8x8 VGA matrix (DB15HD) is available in the same chassis to route high-resolution sources such as graphics generators or laptop pc's to several downstream devices such as data monitors and LCD projectors without loss of resolution.
Modular From 8x8 Composite Video To 8x8 RGBHV With Optional 8x8 VGA Matrix 30-200MHz Video Bandwidth (200MHz RGBHV/ VGA) SAS Instruction Set (Simple Ascii Strings) 8x8 Unbalanced or Balanced Stereo Audio With Volume & Tone Control LCD Status Display Available With Independent 200MHz 8x8 VGA Matrix 5-year warranty Applications: Corporate Presentation Education Residential Sports Bars Restaurants
Video: These presentation routers provide full-matrix switching of multiple levels of video. Active, fully buffered, ultra-high bandwidth crosspoint modules allow a variety of signals including composite video, S-video, component and VGA to be switched simultaneously without crosstalk.
Audio: Audio controls include volume, bass, treble, balance, input trim and mute. Adjust each output individually for optimal audio quality in any environment. Salvo commands allow adjusting all zones at once.
Control: Front panel control with dual LCD display, RS-232 port and contact closures. Fully compatible with Creston, AMX and Leightronix event and touch screen controllers.
Dimensions: 4U Rackmount Chassis - 19” W x 7”H x10”D
| TechnicalSpecifications | | Video - Composite, Y/C , Component(30MHz) | | | Frequency Response | 1v NTSC or Y/C (S-VHS orHi-8) or analog HDTV (YUV OR RGB) DC to 30MHz @ 1v<3dB down at30MHz | | | Crosstalk | less than -70 dBat 5 MHz | | | Input Impedance | 75 ohms | | | Output Impedance | 75 ohms | | | Gain | unity +/-0.2 dB | | | Connectors | BNC | | Video - RGBHV (200MHz) |
| | Levels | Composite, Y/C,YUV/RGB, RGBS, RGBHV | | | Frequency response | DCto 200MHz: @ 1V <-6db | | | Video Input | up to 1.0v p-pRGB@75 ohms | | | Input Impedance | 75 ohm | | | Output Impedance | 75 ohm | | | Sync Impedance | 510 ohms | | | Sync Range | H up to 250KHz, Vup to 250Hz | | | Crosstalk | all hostile: typ<-70db @5MHz, <-55db @2OMHz | | | Connectors | BNC |
| | Levels | VGA,SVGA, XGA, UXGA | | | Frequency response | DCto 200MHz: @ 1V <-6db | | | Input Impedance | 75 ohm | | | Output Impedance | 75 ohm | | | Crosstalk | all hostile: typ <-70db @5MHz, <-55db @2OMHz | | | Connectors | DB15HD |
| Unbalanced Audio | | | Levels | 2V Unbalanced Stereo Audio | | | Frequency Response | 20Hz through 30KHz | | | Crosstalk | less than -85 dBat 1kHz | | | Input Impedance | 15k ohms, DC coupled | | | Output Impedance | 100ohms, DC coupled Gain (all controls flat): unity +/- 0.2 dB | | | Connectors | RCA | | Balanced Audio | | | Levels | 0,4, or 16dB clipping at 18dB | | | Frequency Response | 20Hz through50KHz +/- 1/4dB | | | Hum and Noise | less than -90dB | | | Crosstalk | less than -90dB@20KHz | | | Input Impedance | Bridging or 600 Ohm Termination | | | Output Impedance | 100ohms | | | Connectors | Removable, screw terminal | | Audio Functions | | | Front Panel Control or Serial PortUtilizing Knox SAS (Simple ASCII Strings) | OutputVolume InputTrim BassBoost/Cut TrebleBoost/Cut Left/RightBalance Mute Loudness - TimedFader
| | | | | | Power | | | | 100-120 or 200-240 VAC, 47 to63 Hz, 50 Watts maximum | | | | | | Dimensions | | | | 4U rackmount chassis 7” high x 19”wide x 10” deep | | | | Shipping Weight 12 lbs. |
|