A2D Solutions - SwitchThis.Com : Miranda : Miranda HRS-1801

Miranda HRS-1801

Expandable Routers

The Densité Series HRS-1801 is an expandable 10x4 routing switcher capable of switching HD and SD-SDI as well as compressed domain signals such as ASI or SSI/SMPTE-310M. The HRS-1801 can occupy as few as 3 slots of a 2RU Densité frame, which makes it a highly compact routing solution. The 10 inputs can be easily expanded up to 40 inputs by increments of 10, providing 20x4, 30x4 and 40x4 routing configurations. The HRS-1801 is available in non-reclock, reclock and clean/silent switching configurations. In clean switch mode, the HRS-1801 offers the flexibility to tie two clean outputs (leaving 2 independent busses) or to provide one clean signal plus three independent non-clean outputs. The HRS-1801 can be controlled by Ethernet, using a dedicated control panel (RCP-10x0) or the iControl / iRouter software. A serial RS-422 port is available for control by automation systems. This small routing switcher is the ideal solution for a variety of monitoring, protection and master control applications.

FEATURES
Highly integrated10x4 router Supports HD-SDI,SDI, ASI and SSI/SMPTE-310 Easy expansion upto 40x4 by increments of 10 inputs Basic 10x4non-reclocked configuration. Software optionsfor reclocking & clean switch configurations Two line timingwindow with clean switch option		Reference inputwith passive loop-through Ethernet controlvia iControl, or dedicated control panel(RCP-10x0 series) Serial controlvia RS-422 MonitoringSwitching Bridge (MSB) compatible for SD signals Thumbnail andaudio level meter streaming

SPECIFICATIONS
VIDEO INPUTS (UP TO 40) LEVEL: SMPTE-259M-C (270Mbps) SMPTE-292M(1.485, 1.485/1.001 Gbps) DVB-ASI, SMPTE-310M SUPPORTED FORMATS: SD: 480i59.94,576i50 HD: SMPTE-274M:1080i59.94,1080i50 HD: SMPTE-296M:720p59.94, 720p50 CABLE LENGTH: 275 m (900’) Belden 8281at 270 Mbps 110 m (350’) Belden 1694A at 1.485 Gbps RETURN LOSS: >15dB up to 1.0GHz, >12dB between 1.0GHz and 1.5GHz VIDEO OUTPUTS SD MODE: SIGNAL (4): SMPTE-259-C(270 Mbps) SUPPORTED FORMATS: SD: 480i59.94, 576i50 RETURN LOSS: >15dB up to 270 MHz HD MODE: SIGNAL (4): SMPTE292M (1.485, 1.485/1.001 Gbps) SUPPORTED FORMATS: HD: SMPTE 274M: 1080i59.94, 1080i50 HD: SMPTE 296M: 720p59.94, 720p50 RETURN LOSS: >15dB up to 1.0 GHz >12 dB between 1.0 GHz & 1.5 GHz JITTER: <0.2UI as per SMPTE-292M		REFERENCE INPUT SIGNAL(1): SMPTE 170M/SMPTE 318M/ITU624-4/BUT 470-6 or Comp. Sync SMPTE 274M / SMPTE 296M Tri-Level Sync RETURN LOSS: >35 dB up to 5.75 MHz SERIAL CONTROL CONNECTOR: RJ-45 SIGNAL: RS-422 DATA RATE: 9600, 19200, 38400, 57600,76800, 115200 VIDEO PROCESSING PERFORMANCE SIGNAL PATH: 10 bits PROCESSING DELAY: Non Clean Switch 30 nsClean Switch 2 Lines Maximum EMBEDDED AUDIO PROCESSING PERFORMANCE(CLEAN SWITCH ONLY) QUANTIZATION: 20-24 bits SAMPLING: 48 KHz, synchronous NUMBER OF CHANNELS: 16, 4 Groups OTHER POWER: 13 W for 10x4 or 10x3 with cleanswitch 17 W for 20x4 or 20x3 with clean switch 21 W for 30x4 or 30x3 with clean switch 25 W for 40x4 or 40x3 with clean switch

ORDERING INFO

HRS-1801 HD/SD/ASI 10x4 ExpandableRouting Switcher (Non Reclock)
HRS-1801-TRP Triple rear connectorpanel
HRS-1801-QRP Quad rear connector panel

Options:

HRS-1801-OPT-RK Reclock option for oneHRS-1801
HRS-1801-OPT-CS Clean and silentswitch option for HRS-1801

Input Expansion Card:

HRS-1801-IN-EXP 10 input expansion kitfor HRS-1801
HRS-1801-DRP Double rear connectorpanel (should be used only when ordering HRS-1801-IN-EXP)

Housing Frame: Densité, Densité 2

Software Control:

iControl Remote Control and MonitoringSoftware
iControl Solo Stand-alone RemoteControl Software
iRouter Router Control Software

Control Panels:

RCP-1010 Router control panel for upto 10 sources
RCP-1020 Router control panel for upto 20 sources
RCP-1030 Router control panel for upto 30 sources
RCP-1040 Router control panel for upto 40 sources

Miranda HRS-1801 Expandable Routers
	Item#		Weight
	HRS-1801	CALL	0.00	0.00
HD/SD/ASI 10x4 Expandable Routing Switcher with Reclock and Clean Switch